Spray hose installation

For additional information on Moen products visit solutions. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product. Non US? Moen Canada Other International Sites. This article will explain how to replace a faucet hose. Remove the hose weight. Use a channel lock or pliers to unthread the hose coupling off of the threaded metal faucet body 3. Grab ahold of the sprayer and pull the hose out through the faucet toward you.

Tighten the spray wand onto the hose. Insert the hose into the opening of the faucet body and feed through. Thread the hose onto the threaded metal faucet body. Install the hose weight onto the hose on the spray wand side a few inches up from the bottom. Disconnect the Single quick connect from the faucet body: Quick Connect Types : Black with white release tab- Squeeze the white tabs together and push the tabs in.

Pull the quick connect off of the faucet body. White with black release tab -Press and hold the black button to release the quick connect from the faucet body and pull the quick connect off of the faucet body. Remove the quick connect from the hose by unthreading it from the hose. Thread the quick connect into the hose. But, with a couple of good wacks with a mallet, it pushed through. He removed the blue tape. It was super simple! Pull out that blue clip. Push the sprayer hose nipple in.

Push the clip back in. This is what it looks like under the sink looking up. Above is before the sprayer, with the blue plug. Below is after, with the sprayer coming through the counter and plugged into the bottom of the faucet. So, if you see that blue plug at the bottom of your Delta faucet, this is how easy it is to add a sprayer! You must be logged in to post a comment. We added a sprayer to the kitchen faucet that came standard with our Schumacher Home.

Schumacher Homes Kitchen Faucet Options Schumacher offers a lot of options, but we decided to stick with the kitchen faucet that was included. Install the brass adapter or by threading it to the end of threads on the underside of the faucet.

Remove the white protective sleeve. Attach the side spray hose onto the quick connect and insert the end of the quick connect over the faucet body. There will be an audible click to let you know the faucet part is secure. To test this, gently tug on the quick connect. Double Quick Connect Double Quick Connect : Black Connector with white release tab -Squeeze the white tabs together and push the tabs in.

Pull the hose from the quick connect. White Connector with black release tab -Press and hold the black button while pulling the hose out from the quick connect. Attach the side spray hose back onto the quick connect.

If using a double quick connect attach it to the faucet body.